PDA

View Full Version : apexi avc-r settings?mph/kph



eliters
20-08-2006, 20:44
hi i have a apexi avcr and want to change it from kph to mph,and if poss the boost to psi,but have no manual,can anyone help?ive read it can be done but not how?:2ponder:

Gttboy
20-08-2006, 20:58
I don't think you can as i would like to do the same & haven't found a way yet.

eliters
20-08-2006, 21:08
grrr,i did read on a post somewhere it could be done but me like you cant figure it out???
i dont know what the boost setting thing means either??1.0/kg or something?is it bar/psi or ?????:2ponder: :2ponder: :cuckoo:

Gttboy
20-08-2006, 21:18
I beleive that to be a bar.
HTH
Steve

Scott.T
20-08-2006, 21:37
The boost setting is as good as damn it in Bar.

1 kilogram-force/square centimeter = 0.980 665 bar

eliters
20-08-2006, 21:45
wicked so its just under a bar then(by a smidge) also was playin with the duty map earlyer set it high then scaled down to 50 an stepped back to 90 at the end,BLO0DY HELL did it go!!!!!
just nailed me to my seat and shot off,lol!!
but total boost reached said 1.23 when i got home so turned boost down to 0.90,is this safe do ya recon?

Scott.T
20-08-2006, 21:46
Whats the spec of the car ?

eliters
20-08-2006, 22:10
full magnex inc decat pipe,hks filter,bailey bov,apexi avc-r,tbh thats all i know of,i run it on min 98ron normally 99 tesco super.

Scott.T
20-08-2006, 22:16
Make/Model/Year ?

eliters
20-08-2006, 22:35
sorry its a 93 wrx saloon import impreza wrx

scoobybroke
21-08-2006, 00:04
as its an 93 wrx and if its had the speedo converter fitted to the speedo cable the avcr will read in mph but will say kph lol


matt

Scott.T
21-08-2006, 08:23
standard boost on a 93 WRX is 0.8bar (11.47psi).
I wouldn't recommend taking thwe boost any higher then 0.9bar due to the fuel & ignition maps in the U8, 2C or W6 ECU (it may be running any of these) being fairly poor.

I've seen a 93 WRX det quite badly at just under 14psi.

If it were a Z4 ECU from a later car you may be able to get away with 1 bar

eliters
21-08-2006, 10:57
cool thanks for the info ,sohow do i go about running more boost?will a remap sort it or do i need new injectors and a fmic?
i dont need silly power,but 1-1.2bar should be more than ample with it running currently at around12psi i think,before i adjusted the duty,so am gonna reset the boost today to account for the duty increase,and build another map on setting a for round town(prob about 0.7 with about 40% duty).
does any one know of gtr in brighton?and could they remap it do you think?also any idea on cost if thats what i need?
cheers and sorrry for all the Q's,lol.neil.

Scott.T
21-08-2006, 11:41
PM me and I can sort you with a remap.

eliters
21-08-2006, 12:25
pm sent mate