td05

[C. J.]

How do you tell the diffrents between front and 90 degree versions ? Pics on a link would be good!

[Dyney]

On a FE (front entry) you can see the compressor wheel
On a 90 deg, it will have a "90 deg" bend on the entry to the turbo as part on the compressor housing :)

http://www.andyforrestperformance.co.uk/mediac/400_0/media/90~degree~and~straight~entry~turbos.JPG
Pic shamelesly stolen for Andy Forrest performance's site :D
The one on the right is FE.
The one on the left has Samco on but imagine it was aluminium cast and you would have a "90 deg"

The TD05 was only produced with a 90 deg inlet for the Scoobs. All the FE TD05's have been moddified to be that way.

[Dyney]

http://i8.ebayimg.com/05/i/000/81/0b/e53b_1.JPG
90deg (although thats upside down, the bend should point up) :rolleyes:

http://www.themgh.info/Ixtab/TD05.jpg
FE