View Full Version : leds in instrument pod
changed out the awful bulbs that are behind the clocks of my car.
fitted some flat top leds..
so what do you think..
got the heater ones coming this week...
http://i137.photobucket.com/albums/q230/mhorkan/bluedashleds.jpg
and you have the same proplem as me
the speedo needle dosent glow
thats why im puting in a head up display
Dirty Dogg
05-06-2009, 23:46
Looks Good, Was Thinking Of Doing Something Simular
hopefully speedo needle not glowing will be done in a week 10 days.ive ordered some needle paint as the old stuff has lost its glow...
666subaru
06-06-2009, 06:45
Where do you get the bulbs from?
sponge bob
06-06-2009, 07:23
if there anything like mine they will last a couple of weeks :thumbdown:
666subaru
06-06-2009, 07:53
if there anything like mine they will last a couple of weeks :thumbdown:
Maybe not a good idea then:nono:
if they only last a couple of weeks im contacting the company i got them from.....
i shall repost in 2 week then...lol
sponge bob
06-06-2009, 11:50
they have a mind of there own, was told that by someone when i got mine, if one stops workin you wip the clocks out and give it a wiggle then when refit a different one has stopped workin, pain in the **** but really good when there all workin
urabusmy94
07-06-2009, 20:13
Got mine from Ultimate Mods:
www. ultimatemods.co.uk
So far so good, although not very impressed with the brightness of the ones for the LED displays….
got mine from www.ultraleds.co.uk
mine have done about 20,000 miles and only the clock one blow the other week,
only problem is to get them to fit properly you have to file down the holder at the bottom of bulb
file down the holder?????? on the instrument pod leds or the ones ive ordered for the heater controls???
urabusmy94
08-06-2009, 22:09
got mine from www.ultraleds.co.uk
mine have done about 20,000 miles and only the clock one blow the other week,
only problem is to get them to fit properly you have to file down the holder at the bottom of bulb
Any chance you remember the part number for the clock LED's?
Were they larger than the ones for the dash itself, as this is where my problem is I think - the light does not illuminate all of the space evenly.
Cheers :thumb:
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.