PDA

View Full Version : Bling? well it's shiney!


Jolly Green Monster
25-04-2006, 23:11
http://images.fotopic.net/?iid=yg6rgb&outx=600&quality=70

http://images.fotopic.net/?iid=ygul9x&outx=600&quality=70

http://images.fotopic.net/?iid=ygvryr&outx=600&quality=70

http://images.fotopic.net/?iid=ygvryq&outx=600&quality=70

should I polish or fit it to the car? :)

Simon
scoobybroke
25-04-2006, 23:45
paint it green lol
Goobie
26-04-2006, 13:33
Polish :D
Jolly Green Monster
26-04-2006, 20:10
I was tempted to paint it but don't think I will be..
scoobybroke
26-04-2006, 20:25
lol well if you need a hand putting it in simon just give me a shout :)
Dyney
27-04-2006, 04:18
You need some rocker covers!!! ;)
Jolly Green Monster
27-04-2006, 10:57
Thanks Matt.

lol.. yeah someone else is having them..

everything is on except the cam seals that I can put on the engine before I need to take bits off the original engine.

Simon
Dyney
27-04-2006, 16:15
If you need them use them :)
Jolly Green Monster
28-04-2006, 09:38
If you need them use them :)
took the decision to use the cam wheels off the original engine.. therefore I cannot fit the cam covers until I have held the cams and fitted the cam wheels therefore I may as well use the ones off the original engine :)

Oh and I have two spare sets anyway.. lol you want phase 1/1.5 or phase 2, I have both.

Simon
Dyney
28-04-2006, 14:34
But you could get these cleaned up and painted ;)
If you have them spare, I'll take the Phase 1.5's

Phase 1 and 1.5 are not the same covers!!
Phase 1 have "Twin cam" cast into the covers and the spark plug hole is square, 1.5's don't and the spark plug hole is oval (not sure if phase 2 are the same as 1.5's though) :)
Jolly Green Monster
28-04-2006, 17:28
Oh!

I have pahse 1.5 heads on the new enigne.. I suspect then I need to use the phase 1.5 cam covers otherwise the plug holes won't line up with the square ones in the phase 1 covers??
Dyney
28-04-2006, 19:07
I know that's why I though I should point it out.
If you need them use them :)

Compare them to the phase 2 ones you have (or where they the 1.5 ones?)
Jolly Green Monster
02-05-2006, 10:35
doh... phase 1.5 only ones that would fit..

old one came out
http://images.fotopic.net/?iid=yh2g1v&outx=600&quality=70

Simon
Scott.T
02-05-2006, 11:13
OoH! A Transverse mounted scooby engine....

I hope you held a good wake, may it RIP.
BoysAndOurToys
03-05-2006, 11:17
Good old spit and polish, will look awesome
Jolly Green Monster
03-05-2006, 11:35
OoH! A Transverse mounted scooby engine....

I hope you held a good wake, may it RIP.
lol.. yes mental note.. when the engine going back in.. secure the rope so the engine doesn't want to rotate and nearly take the windscreen out :)